Compliance Services for Wired Communications of Australia

From: | Testing & Certification | kmolab.com  Date:2022-07-12  Belong to:Company News

The Australian Communications and Media Authority ( ACMA ) is an Australian Government statutory authority within the Communications portfolio . ACMA was formed on 1 July 2005 with the merger of the Australian Broadcasting Authority and the Australian Communications Authority.

 

ACMA is responsible for ensuring media and communications works for all Australians. It does this through various legislation, regulations, standards and codes of practice. ACMA is a 'converged' regulator, created to oversee the convergence of the four 'worlds' of telecommunications, broadcasting, radio communications and the internet.

ACMA is an independent agency composed of the Chairman, Deputy Chair and two part-time Members, and managed by an executive team comprising the Chairman (who is also the Chief Executive Officer of the agency), the Deputy Chair, four general managers and nine executive managers. The corporate structure comprises four divisions – Communications Infrastructure, Content, Consumer and Citizen, Corporate and Research, and Legal Services.

 

Our KMO LAB has complete telecommunications terminal testing capabilities and RTA accreditation of Australia ACMA, can directly issue ACMA accreditation reports, and  now we provide testing standards for domestic and foreign customers as follows:

 

AS/CA S002:2010_Analogue Interworking And Non-Interference Requirements For Customer Equipment For Connection To The PSTN Amdt No 1/2012 to AS/CA S002:2010 

AS/CA S003.1:2010_Requirements For Customer Access Equipment For Connection To A Telecommunications Network - Part 1: General Amdt No 1/2012 to AS/CA S003.1:2010

AS/CA S003.2:2010_Requirements For Customer Access Equipment For Connection To A Telecommunications Network - Part 2: Analogue And TDM Based Technologies

AS/CA S003.3:2010_Requirements For Customer Access Equipment For Connection To A Telecommunications Network - Part 3: Packet And Cell Based Technologies

AS/CA S004:2013_Voice Performance Requirements For Customer Equipment

AS/ACIF S006:2008_Requirements For Customer Equipment/ Operating In The Voiceband/ For Connection To The Non-Switched Telecommunications Network

AS/CA S008:2010_Requirements For Customer Cabling Products Amdt No 1/2014 to AS/CA S008:2010 

AS/ACIF S016:2001_Requirements For Customer Equipment For Connection To Hierarchical Digital Interfaces

AS/ACIF S038:2001_Requirements For Isdn Primary Rate Access Interface

AS/ACIF S040:2001_Requirements For Customer Equipment For Use With The Standard Telephone Service - Features For Special Needs

AS/CA S041.1:2015_Requirements For DSL Customer Equipment For Connection To The PSTN - Part 1: General

AS/CA S041.2:2015_Requirements For DSL Customer Equipment For Connection To The Public Switched Telephone Network - Part 2: Modems For Use In Connection With All DSL Services

AS/CA S041.3:2015_Requirements For DSL Customer Equipment For Connection To The Public Switched Telephone Network - Part 3: Filters For Use In Connection With All xDSL Services

AS/CA S043.1:2015_Requirements For Customer Equipment For Connection To A Metallic Local Loop Interface Of A Telecommunications Network- Part 1: General

AS/CA S043.2:2016_Requirements For Customer Equipment For Connection To A Metallic Local Loop Interface Of A Telecommunications Network - Part 2: Broadband

AS/CA S043.3:2015_Requirements For Customer Equipment For Connection To A Metallic Local Loop Interface Of A Telecommunications Network Part 3: Dc/ Low Frequency AC and Voiceband

AS/CA S042.1:2018_Requirements For Connection To An Air Interface Of A Telecommunications Network - Part 1: General

AS/CA S042.1:2022 Requirements for connection to an air interface of a Telecommunications Network - Part 1: General

AS/ACIF S042.3:2005_Requirements For Connection To An Air Interface Of A Telecommunications Network - Part 3: GSM

AS/CA S042.4:2018_Requirements For Connection To An Air Interface Of A Telecommunications Network—Part 4: IMT Customer Equipment

AS/CA S042.4:2022_Requirements for connection to an air interface of a Telecommunications Network—Part 4: IMT Customer Equipment

AS/CA S042.5:2022_Requirements for connection to an air interface of a Telecommunications Network—Part 5: IMT-2020 Customer Equipment

AS/NZS 60950.1:2015_Australian/New Zealand Standard. Information technology equipment—Safety

AS/NZS 62368.1:2018_Audio/video_ information and communication technology equipment Safety requirements (IEC 62368-1:2014 (ED. 2.0) MOD)


About Us
Follow us for the latest newsFollow us for the latest news
Contact Us
+86 755-8364 2690

Working hours: 9:00-18:30, Monday to Friday

Contact:Lisa Liu

Mobile:18028790769

Email: kmo@kmolab.com

Address:Room 2013, 20th Floor, Business Center, Jiahui Xin Cheng, No 3027, Shen Nan Road, Fu Tian, Shen Zhen, Guang Dong, China

Navigation
Ke Mei Ou Laboratory Co., Ltd. (KMO) is located in Shenzhen, China. KMO is an independent third-party testing Laboratory authorized by many international organizations. Since its establishment, KMO has focused on providing the most professional and efficient wireless & communication & voice product testing and certification services for international export enterprises. It is authorized by ILAC-MRA and ANAB, under the supervision and guidance of ANAB. KMO is a well-known ISO/IEC laboratory accreditation organization accredited laboratory in the United States. It is also authorized and recognized by national or regional agencies such as FCC of the United States, ISED of Canada, ACMA of Australia, Telepermit of New Zealand, OFCA of Hong Kong, IMDA of Singapore, etc.
Ke Mei Ou Laboratory Co., Ltd. Copyright ICP 10094765  Technical Support:KMOLAB